Direct production of biodiesel from high-acid value Jatropha oil with solid acid catalyst derived from lignin

Solid acid catalyst was prepared from Kraft lignin by chemical activation with phosphoric acid, pyrolysis and sulfuric acid. This catalyst had high acid density as characterized by scanning electron microscope (SEM), energy-dispersive x-ray spectrometry (EDX), and Brunauer, Emmett and Teller (BET) method analyses.

It was further used to catalyze the esterification of oleic acid and one-step conversion of non-pretreated Jatropha oil to biodiesel. The effects of catalyst loading, reaction temperature and oil-to-methanol molar ratio, on the catalytic activity of the esterification were investigated.

Results: The highest catalytic activity was achieved with a 96.1% esterification rate, and the catalyst can be reused three times with little deactivation under optimized conditions.

Biodiesel production from Jatropha oil was studied under such conditions. It was found that 96.3% biodiesel yield from non-pretreated Jatropha oil with high-acid value (12.7 mg KOH/g) could be achieved.

Conclusions: The catalyst can be easily separated for reuse.

This single-step process could be a potential route for biodiesel production from high-acid value oil by simplifying the procedure and reducing costs.

Author: Fei-ling PuaZhen FangSarani ZakariaFeng GuoChin-hua Chia
Credits/Source: Biotechnology for Biofuels 2011, 4:56

Published on: 2011-12-07

Copyright by the authors listed above - made available via BioMedCentral (Open Access). Please make sure to read our disclaimer prior to contacting 7thSpace Interactive. To contact our editors, visit our online helpdesk. If you wish submit your own press release, click here.

Comments Page 0 of 0

There are currently 0 comments to display.

+ Add New Comment

Custom Search