MEMS capacitive pressure sensor monolithically integrated with CMOS readout circuit by using post CMOS processes


In this paper, we presents a MEMS pressure sensor integrated with a readout circuit on a chip for an on-chip signal processing. The capacitive pressure sensor is formed on a CMOS chip by using a post-CMOS MEMS processes.

The proposed device consists of a sensing capacitor that is square in shape, a reference capacitor and a readout circuitry based on a switched-capacitor scheme to detect capacitance change at various environmental pressures. The readout circuit was implemented by using a commercial 0.35 ?m CMOS process with 2 polysilicon and 4 metal layers.

Then, the pressure sensor was formed by wet etching of metal 2 layer through via hole structures. Experimental results show that the MEMS pressure sensor has a sensitivity of 11 mV/100 kPa at the pressure range of 100–400 kPa.



Published on: 2017-01-09

Made available by EUPB via SpringerOpen / BioMedCentral. Please make sure to read our disclaimer prior to contacting 7thSpace Interactive. To contact our editors, visit our online helpdesk. To submit your press release click here. The full research and author details are available at http://www.mnsl-journal.com/content/5/1/4

Discussions




Custom Search



Username
Password










© 2017 7thSpace Interactive
All Rights Reserved - About | Disclaimer | Helpdesk